• Fruit Tree Netting

    Fruit Tree Netting

  • Pond Cover Netting

    Pond Cover Netting

  • Insect Netting

    Insect Netting

  • Citrus Tree Netting

    Citrus Tree Netting

  • Row Crop Covers

    Row Crop Covers

  • Overhead Netting

    Overhead Netting

  • Cherry Tree Netting

    Cherry Tree Netting

  • Side Netting

    Side Netting

  • Hail Netting

    Hail Netting

  • Vineyard Netting

    Vineyard Netting

smartnetsystems@gmail.com

Orchard Harvester

Trel-Pick Orchard Harvester

Workers doing orchard harvesting on a Trel-PickThe Trel-Pick is a simple and economic solution for pruning, thinning and picking in trellised orchards.

The Trel-Pick is a simple platform which has three separate operating heights.

The base platform is 2.1m x 4.8m in total, fixed at 0.9m high. Space for two workers facing the trellis is 2.4m long. The remainder allows four bins to be carried with ample space for safe easy access to them and the raised platforms.

The mid platform is adjustable in height from 1.25m to 1.55m. The highest platform is also adjustable in height from 1.6m to 2.2m high. Both of these are 1.2m long by 0.6m wide, and slide in and out.

Access can be gained to either of the raised platforms from the side or rear. There are gates and comfortable steps for added safety.

System Advantages:

Can tow a bin trailer behind for ground pickers

A towing hitch enables a bin trailer to be towed behind the Trel-Pick for use by ground pickers. The left side and or back hand rails swing down to allow loading and unloading of bins.

Worker operating the steering wheel of a Trel-PickSimple to operate

The Trel-Pick is simple to drive. The operator has control over engine throttle, hydrostatic ground speed, power steering and engine start and stop.

The operator only needs to correct steering occasionally even on rough ground and so is predominately able to pick and thin etc.

Worker steering a Trel-Pick harvesterFour wheel steering

Rear steering is controlled with a foot pedal which is used mainly for crab steering in Tatura trellis and Parmet rows on steep ground. It also allows for very sharp turning at the end of rows.

14hp engine with 25 litre boat fuel tank

Trel-Pick is powered by a 14hp V-twin petrol engine with oil alert and has a large air compressor able to run four air secateurs.

The engine base is mounted on springs to reduce vibration. A 25 litre remote fuel tank can be removed for easy refuelling.

Both raised platforms easily telescope

Both raised platforms can be simply adjusted while still in the orchard. Height is varied in 10cm increments by raising or lowering the platform in the telescopic slides. Platform overhang can be altered by sliding inwards or outwards.

Worker using the crate holder on a Trel-PickStandard with four picking crate & picking bag holders

Four crate & picking bag holders are standard which hold a 22 L or 36 L crate. This holder fits over the hand rail.

 

Contact Us Green mouse cursor on an opened mail envelope

Disclaimer

The pictures and information are a guide only.  Specifications are subject to change without notice and without liability expressed or implied.

 

Machinery Instruction Videos

Smart Net Systems

Crendon Machine